CLLT1025/4 Truck Crane

This product has been discontinued and removed from our shelves.

The following lists of the technical parameters of our CLLT1025/4 truck crane are for your reference
1. We collected the parameters of rated lifting capacity after we stop the truck on the solid ground and regulate the platform to level state.
2. The luffing ranges in list are measured under the condition of rated load. When measure the load capacity of the 10.28m long boom, we make sure all the expansion boom sections should be retracted.
3. The rated lifting capacity includes the weight of host lifting hook of 300kg and the auxiliary lifting hook of 70kg.
When the auxiliary boom is fully extended, the actual lifting capacity of the host lifting boom should be 400kg lower than the rated value.
When the host lifting hook is at the end of host boom arm, the actual lifting capacity of auxiliary boom should be 300kg lower than the rated value, and actual lifting capacity of every boom section supported by the boom-end single pulley should be 300kg lower than the rated value and limited within 3000kg.
When the auxiliary lifting hook is on the boom-end single pulley, the actual lifting capacity of each section of the host boom will be 70kg lower than the rated value.
4. Under the condition of not using the fifth supporting leg, the truck crane is forbidden to lift any weight within the 120° sector in front of itself. Only after the fifth supporting leg is mounted can the equipment finish the lifting task 360° all around itself.
5. Please make sure the boom length in the list you refer to is longer than your actual boom length, and arrange the lifting task no heavier than the smallest rate lifting capacity suggested by the list for the sake of safety.

Technical Parameters (truck)
Dimensions Length mm 13105
Width mm 2500
Height mm 3450
Wheel base First-Second mm 4225
Second-Third mm 1350
Load capacity Self weight kg 29375
Axle load Fore shaft kg 7640
Aft shaft kg 19060
Kinetic parameters Rated power of engine kW/(r/min) 199/2300
Rated torque of engine N.m/(r/min) 1000/1200~1600
Traveling parameters Maximum driving speed km/h 77
Minimum turning diameter m 20
Minimum ground clearance mm 282
Approach angle ° 18.5
Departure angle ° 13.9
Braking length(30km/h) m 10
Maximum climbing capacity % 28
Fuel consumption per 100 km L 35
Technical Parameter (crane)
Performance parameters Maximum lifting capacity t 25
Minimum rated Luffing range m 3
The platform tail slewing radius mm 3690
Maximum lifting torque Standard kN.m 838
Supporting leg interval Longitude m 5.03
Transversal m 6.0
Lifting height Standard m 10.15
Longest (host boom) m 31.67
Longest (host and auxiliary boom) m 39.17
Boom length Standard m 10.28
Longest (host boom) m 31.7
Longest ( host and auxiliary boom) m 39.7
Operation parameters Luffing time Full luffing s 85
Extension time Full extension s 85
Maximum slewing speed r/min 2.6
Maximum lifting speed of host boom with single rope (to the third level of height) m/min 130
Auxiliary lifting speed of auxiliary boom with single rope (to the second level of height) m/min 130
Lifting Capacity Parameters (unit: kg)
Luffing range(m) All supporting legs are full extended + fifth supporting leg (360° lifting task)
All supporting legs are full extended (120° front lifting task is forbidden)
Host boom Host boom luffing angle (°) Host boom: 34.5m+
Auxiliary boom: 8.3m
Boom length (m) Auxiliary boom installation angle
10.8 15.54 20.28 25.02 29.76 34.5 30°
3.0 25000




80 3000 1900
3.5 25000 17000



78 2850 1900
4.0 24000 17000 16000


76 2850 1800
4.5 22000 17000 16000 11000

74 2800 1750
5.0 20000 17000 16000 10800

72 2700 1700
5.5 18000 17000 15200 10500 8000
70 2650 1600
6.0 16300 16500 14200 10200 8000
68 2600 1550
6.5 14900 15200 13200 9800 8000 7000 66 2300 1520
7.0 13300 13700 12300 9300 8000 7000 64 2200 1480
8.0 10500 11000 11000 8500 7400 6500 62 2150 1450
9.0
9000 9300 7800 6800 6000 60 2050 1400
10.0
7500 7800 7200 6300 5500 58 1800 1350
12.0
5300 5600 5700 5400 4600 56 1650 1250
14.0

4100 4300 4450 4000 54 1500 1200
16.0

3100 3300 3400 3500 52 1350 1000
18.0


2700 2700 2800 50 1200 900
20.0


2200 2100 2200 45 950 650
22.0


1700 1700 1800 40 700 400
24.0



1300 1400 35 500 300
26.0



1000 1100 30 300
28.0




850


30.0




500


Magnification 8 6 5 4 3
1
Luffing curve