CLPS95V Versatile Paver

This product has been discontinued and removed from our shelves.

The CLPS95V versatile paver, developed by our company, is an ideal machine for paving highway base and surface. This construction machine absorbs the advanced technology of foreign machine and features high automation, easy operation, as well as high efficiency.

Driven by the hydraulic system, our machine is configured with mechanically pieced screed, vibrator and double tampers. Swing of tamper can be adjusted. CLPS95V versatile paver can lay the road with good leveling and high density. The advanced wearable material is made into the machine's vulnerable parts to make sure good performance.

Technical Specification
Paving Width (mm) 3000-9500
Paving Thickness (mm) 20-320
Paving Speed (m/min) 0-19
Traveling Speed (km/h) 0-2.9
Hopper Capacity (t) 14
Max. Theoretical Output (t/h) 600
Vibrating Frequency (Hz) 0-50
Tampering Frequency (Hz) 0-1500
Weight (kg) 22000~26000
Overall Size 6314*3182*3990
Engine six cylinders, VOLVO TAD720V 174Kw/2300r/min

Driving System
The whole machine is driven by the hydraulic system. The engine is connected to gearbox and can drive all the hydraulic pumps to supply power to the components as follows.
1. Left & right crawlers traveling devices
2. Left & right conveyors
3. Left & right feeders
4. Double tampers
5. Vibrating devices
6. Hopper overturning, screed up & down, screed extension & withdrawal, pivot cylinder

Traveling Device
The crawlers are driven by independent hydraulic system and are controlled by the microcomputer. The traveling device comprises variable motor and planet speed reducer of big ratio which are connected to each other as a whole and installed in the drive hub.

Weight Bearing Mode
Each crawler has ten lubrication-free bearing wheels and is provided with power accumulator. The rubber patches can be replaced. The touch area of each crawler is 3247*320mm.

Brake of Parking
The hydraulic normal-close disc brake is installed on each traveling planet speed reducer.

We can change the speed of the left and right crawler driving wheels by turning potentiometer knob left or right to realize steering.

This hopper capacity is up to 14 tons. Hopper overturning is operated by hydraulic stroke cylinder for entire discharge.

Push Roller
This push roller can be used to push the truck rear wheels.

Conveyor System
The scraper is used to convey material. The conveyor soleplate is made of the imported wearable steel plate.
There is respective hydraulic driving system for each scraper conveyor. This system consists of pump, motor, speed reducer and chain transmission. The chain wheel drives the scraper to revolve.
The operation speed range of this machine is between 0 and 29m/min. The switches on the operations console help the realization of manual operation while the supersonic material sensor helps the realization of auto operation.

Feeder System
The blades of the screw feeder adopted by the system are obtained from high wearable material and can be easily replaced.
There is respective closed hydraulic driving system for each screw feeder. This feeder system consists of variable displacement pump, motor, speed reducer and chain transmission. The screw is driven by the chain wheel.
The operation speed of this system ranged from 0 to 100r/min. The switches on the operations console can control the three-step speed change. The supersonic material sensor helps the realization of the auto operation.

Electrical System
The system is equipped with S11 controller from USA and two batteries. The voltage is 24V.

Automatic Leveling Units
Two imported longitudinal leveling units and one transverse automatic leveling unit for the automatic adjustment of the longitudinal and transverse level.

Working Devices
The screed can be mechanically extended.

Double tampers impact stroke primary tamper 5mm
secondary tamper 6mm
pressure 28MPa
Vibration pressure 20MPa
Extended screed 1.5m/2 segments 1m/2 segments
0.5m/2 segments 0.25m/2 segments

1. The CLPS95V versatile paver adopts the full hydraulic drive mode and is controlled by the microcomputer with digital display diagnosis function.
The machine uses the integrative technique which combines mechanical, electrical and hydraulic pressure drive mode. The two crawlers have closed hydraulic driving systems respectively.
Our versatile paver uses integrative technique of mechanism, electricity, and hydraulic pressure. The two crawlers have closed hydraulic driving systems respectively. Controlled by the microcomputer, this system can automatically and constantly control its working speed. The display has good man-machine interface, which can be used to monitor the situation of machine and diagnose its failure.

2. The ultrasonic material sensors can be used to control the right and left hand conveyors and feeders to make sure the material can be automatically and evenly fed.

3. The two longitudinal leveling devices and one transverse automatic leveling device are all imported from abroad for the automatic adjustment of the longitudinal and transverse level.

4. This machine adopts the high intensity screed, double tamper and vibrating device to ensure the paving efficiency.

5. The screed offers anti-sinkage function.
The screed does not sink while the machine pauses for material loading. This could avoid recess on the pavement.

6. This machine utilizes Germany BEKA-MAX centralized lubrication system.

7. All key parts of this machine are imported from abroad.

8. The humanization design of this CLPS95V versatile paver improves the operator comfort.

Key Parts
1. Engine: SWEDISH VOLVO engine
2. Pump and Motor: Germany Bosch-REXROTH and USA SAUER-DANFOSS
3. Hydraulic Hose Fittings: USA PARKER
4. Speed Reducer of Conveyor and Feeder: Italy RR
5. Transfer Case: Italy BREVINI
6. Centralized Lubrication: Germany BEKA-MAX
7. Display: Germany Brand
8. Switches & Fitting: Germany Products

Note: Please kindly refer to the latest offer issued by our company. We reserve all the rights about any changes of the technical specification as the technology development.